subject
Engineering, 03.12.2019 05:40

A50 mol% mixture of propane (1) and n-butane (2) enters an isothermal flash drum at 37°c. if the flash drum is maintained at 0.6 mpa, what fraction of the feed exits as liquid? what are the compositions of the phases exiting the flash drum?
work the problem in the following two ways.
a. use raoult’s law (use the peng-robinson equation to calculate pure component vapor pressures).
b. assume ideal mixtures of vapor and liquid. (use the peng-robinson equation to obtain fsat for each component.)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 12:20
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 12:20
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 03.07.2019 12:20
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 12:30
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
You know the right answer?
A50 mol% mixture of propane (1) and n-butane (2) enters an isothermal flash drum at 37°c. if the fla...
Questions
question
Mathematics, 05.05.2020 11:56
question
Mathematics, 05.05.2020 11:56
question
Mathematics, 05.05.2020 11:56
question
Social Studies, 05.05.2020 11:56
Questions on the website: 6551838