subject
Engineering, 03.12.2019 05:50

Apressure gage and a manometer are connected to a compressed air tank to measure its pressure. if the reading on the pressure gage is 11 kpa, determine the distance h between the two fluid levels of the water filled manometer. assume the density of water is 1000 kg/m3 and the atmospheric pressure is 101 kpa. quiz 3

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 12:20
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 12:30
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 03.07.2019 21:35
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 13:12
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.​
Answers: 1
You know the right answer?
Apressure gage and a manometer are connected to a compressed air tank to measure its pressure. if th...
Questions
question
Chemistry, 23.04.2020 04:17
question
Chemistry, 23.04.2020 04:17
Questions on the website: 6713912